Thursday, June 17, 2010

Blind stitch hemming nitty gritty

It is "Make it, Wear It" month over at Sew Mama Sew, and every day awesome sewists are contributing inspiration and information. By commenting on any of the posts, or by posting a pic of something you've made for yourself this month, you can win some incredible prizes! Yesterday, I had the huge honor of taking part and tackling the subject of hemming. In the article, I address hem width, folding, stitching, etc. I included a very brief overview of blind stitch hemming by machine, and some of my dear sewing friends asked me to elaborate on the subject. It is actually very easy, especially with the proper foot in hand :) .

Photobucket

The blind hemming foot has a blade in the center that makes for perfect alignment during the stitching process. It is also great for edgestitching!


Photobucket

I'm going to demonstrate blind hemming using Jennifer Paganelli's gorgeous Lee Paisley from the So St. Croix line. I finished the raw edge using my serger, but you could also zig-zag stitch or even make a 1/4" fold.


Photobucket

Fold the hem to the desired width. I'm using my handy dandy cardstock template to make a 1.25" fold. Up to this point, I haven't done anything differently than I would for a regular straight stitched hem.


Photobucket

Lay your fabric out with the right side facing up and the bottom folded edge pointing towards you.


Photobucket

Lift up the top edge of the fabric up and pull it towards you, making a fold that is about 1/4" from the finished edge (note: if you made an initial 1/4" fold instead of edge finishing, this new fold should be in line with the raw edge).


Photobucket

Here is a side view - the fold makes a Z shape.


Photobucket

Press to set the fold.


Photobucket

Put on your blind stitching foot, and set your machine to the EKG looking stitch shown above. The width and spacing of this stitch can be adjusted, and depending on your machine, you may be able to adjust the needle position in this setting. Before you hem your garment, optimize on scraps to get the stitching as invisible as possible.


Photobucket

Put the fabric under the presser foot, lining up the blade with the top folded edge. Stitch along, keeping the blade flush with the fold.


Photobucket

Most of the stitching will be about 1/8" from the outer edge (or outer fold, if you made an initial 1/4" fold), but every few stitches the needle will jump over and "catch" the material at the fold.


Photobucket

After flipping the fold back and pressing the hem, this is what the wrong side will look like...


Photobucket

...and this is what the right side looks like! Keep in mind I'm using contrasting thread - matching thread would be much less noticeable.


Photobucket

Here is a hem using a longer stitch length - even less obvious! The goal is to get as little thread as possible showing on the outside, so definitely play with your stitch settings. With thick fabrics like wool, the stitching might not show at all because the needle can catch the fibers without going through to the other side.

For more info on hemming and garment sewing in general, head on over to the Sew Mama Sew Blog. And be sure to leave a comment so you can win some of those great prizes!

14 comments:

Marie said...

This is so fabulous! Thanks for the step by step pictures! I have about 6 pairs of really nice dress slacks that I've been wanting to do this hem on. 2 of them have lining which may be more tricky, but I think I am definitely ready to try it now. Thanks again!

Shannon said...

well, it makes sense now! Thanks so much!
and why is it I never understand until you describe it step by step for me?
You're a gem, Carla! Thanks so much!

MV said...

I need this! Where can I order one?

Samina said...

Fantastic tutorial! Thank you so much for the step by step detail. That makes the process so clear for a newbie like me.

Misty said...

Thank you so much for sharing this! I had no idea how to do it, and the step-by-step pictures are so helpful!

Cathy said...

I have wondered how to do this for, hmmmmmmm, let me think....since middle school....1979. Wow! I can finally go to bed tonight actually knowing how to blind hem stitch. I am thrilled to pieces!!! Thank you soooo much Carla!!!!

Anonymous said...

Thank you SS!
~Noel

Cook Clean Craft said...

I'm visiting from Sew Mama Sew. Thanks for the great tips - I'm a new follower and subscriber!

patsijean said...

I love the blind hem stitch and attachment and have been using them for years. Good tutorial and I will try pressing the fold to see how that goes. When I cannot find a thread that blends well enough, I often use the nylon threads, either in smoke or the clear. I have had absolutely no problems with pressing the hems. I do recommend loosening the upper tension a bit to prevent stretching.

kindacrafty said...

Where was this three months ago when I was folding an index card in an attempt to figure out blind hem?? :) Thank you so much for the pictures. Any chance you can explain a rolled hem next? I have three different rolled hem feet and not a clue how to use them.

Victoria said...

Hi Carla,
I stumbled upon your blog the other day and am glad I did. I love your blog!!! It's funny you are a molecular biologist, I work in a microbial ecology lab that specialize in molecular techniques! I love to meet fellow scientists that sew! I think it's great you've gotten into pattern drafting. Your patterns are absolutely fabulous. I too have blog www.tenthousandsewinghours.blogspot.com and hope you would stop by. I look forward to your future posts:)

veritate said...

This is excellent!

Thank you so much!

Sabah said...

I knew, in theory, how do use the blind stitch foot already... but it made no sense. These pictures are so pretty, and more importantly, clearly show the process.

Great post, thank you <3

Lynette @ My Craft Discovery said...

thank you thank you thank you! I need to hem some dress pants, and I think this tutorial will help me tremendously! Thanks!